Gecko [ v99win.today ]

Name	Size	Permission
X11	[ DIR ]	drwxr-xr-x
acpi	[ DIR ]	drwxr-xr-x
alternatives	[ DIR ]	drwxr-xr-x
apache2	[ DIR ]	drwxr-xr-x
apparmor	[ DIR ]	drwxr-xr-x
apparmor.d	[ DIR ]	drwxr-xr-x
apt	[ DIR ]	drwxr-xr-x
bind	[ DIR ]	drwxr-sr-x
binfmt.d	[ DIR ]	drwxr-xr-x
ca-certificates	[ DIR ]	drwxr-xr-x
calendar	[ DIR ]	drwxr-xr-x
chkserv.d	[ DIR ]	drwxr-xr-x
cl.selector	[ DIR ]	drwxr-xr-x
console-setup	[ DIR ]	drwxr-xr-x
cpanel	[ DIR ]	drwxr-x--x
cracklib	[ DIR ]	drwxr-xr-x
cron.d	[ DIR ]	drwxr-xr-x
cron.daily	[ DIR ]	drwxr-xr-x
cron.hourly	[ DIR ]	drwxr-xr-x
cron.monthly	[ DIR ]	drwxr-xr-x
cron.weekly	[ DIR ]	drwxr-xr-x
dbus-1	[ DIR ]	drwxr-xr-x
default	[ DIR ]	drwxr-xr-x
depmod.d	[ DIR ]	drwxr-xr-x
dhcp	[ DIR ]	drwxr-xr-x
dictionaries-common	[ DIR ]	drwxr-xr-x
dovecot	[ DIR ]	drwxr-xr-x
dpkg	[ DIR ]	drwxr-xr-x
elinks	[ DIR ]	drwxr-xr-x
emacs	[ DIR ]	drwxr-xr-x
fonts	[ DIR ]	drwxr-xr-x
freetds	[ DIR ]	drwxr-xr-x
ghostscript	[ DIR ]	drwxr-xr-x
groff	[ DIR ]	drwxr-xr-x
grub.d	[ DIR ]	drwxr-xr-x
gss	[ DIR ]	drwxr-xr-x
imunify360	[ DIR ]	drwxr-xr-x
init.d	[ DIR ]	drwxr-xr-x
initramfs-tools	[ DIR ]	drwxr-xr-x
insserv.conf.d	[ DIR ]	drwxr-xr-x
iproute2	[ DIR ]	drwxr-xr-x
iptables	[ DIR ]	drwxr-xr-x
kernel	[ DIR ]	drwxr-xr-x
keyutils	[ DIR ]	drwxr-xr-x
ld.so.conf.d	[ DIR ]	drwxr-xr-x
ldap	[ DIR ]	drwxr-xr-x
libnl-3	[ DIR ]	drwxr-xr-x
libpaper.d	[ DIR ]	drwxr-xr-x
lighttpd	[ DIR ]	drwxr-xr-x
logcheck	[ DIR ]	drwxr-xr-x
logrotate.d	[ DIR ]	drwxr-xr-x
mail	[ DIR ]	drwxr-xr-x
modprobe.d	[ DIR ]	drwxr-xr-x
modules-load.d	[ DIR ]	drwxr-xr-x
mysql	[ DIR ]	drwxr-xr-x
needrestart	[ DIR ]	drwxr-xr-x
netplan	[ DIR ]	drwxr-xr-x
network	[ DIR ]	drwxr-xr-x
networkd-dispatcher	[ DIR ]	drwxr-xr-x
newt	[ DIR ]	drwxr-xr-x
nfs.conf.d	[ DIR ]	drwxr-xr-x
nginx	[ DIR ]	drwxr-xr-x
opt	[ DIR ]	drwxr-xr-x
pam.d	[ DIR ]	drwxr-xr-x
pdns	[ DIR ]	drwxr-xr-x
perl	[ DIR ]	drwxr-xr-x
pki	[ DIR ]	drwxr-xr-x
pm	[ DIR ]	drwxr-xr-x
powerdns	[ DIR ]	drwxr-xr-x
ppp	[ DIR ]	drwxr-xr-x
profile.d	[ DIR ]	drwxr-xr-x
proftpd	[ DIR ]	drwxr-x--x
python2.7	[ DIR ]	drwxr-xr-x
python3	[ DIR ]	drwxr-xr-x
python3.10	[ DIR ]	drwxr-xr-x
rc0.d	[ DIR ]	drwxr-xr-x
rc1.d	[ DIR ]	drwxr-xr-x
rc2.d	[ DIR ]	drwxr-xr-x
rc3.d	[ DIR ]	drwxr-xr-x
rc4.d	[ DIR ]	drwxr-xr-x
rc5.d	[ DIR ]	drwxr-xr-x
rc6.d	[ DIR ]	drwxr-xr-x
rcS.d	[ DIR ]	drwxr-xr-x
request-key.d	[ DIR ]	drwxr-xr-x
rsyslog.d	[ DIR ]	drwxr-xr-x
scl	[ DIR ]	drwxr-xr-x
security	[ DIR ]	drwxr-xr-x
selinux	[ DIR ]	drwxr-xr-x
sensors.d	[ DIR ]	drwxr-xr-x
skel	[ DIR ]	drwxr-xr-x
smartmontools	[ DIR ]	drwxr-xr-x
snmp	[ DIR ]	drwxr-xr-x
snmp-mibs-downloader	[ DIR ]	drwxr-xr-x
ssh	[ DIR ]	drwxr-xr-x
ssl	[ DIR ]	drwxr-xr-x
sudoers.d	[ DIR ]	drwxr-xr-x
sw-engine	[ DIR ]	drwxr-xr-x
sysconfig	[ DIR ]	drwxr-xr-x
sysctl.d	[ DIR ]	drwxr-xr-x
sysstat	[ DIR ]	drwxr-xr-x
systemd	[ DIR ]	drwxr-xr-x
terminfo	[ DIR ]	drwxr-xr-x
tmpfiles.d	[ DIR ]	drwxr-xr-x
ubuntu-advantage	[ DIR ]	drwxr-xr-x
udev	[ DIR ]	drwxr-xr-x
ufw	[ DIR ]	drwxr-xr-x
update-manager	[ DIR ]	drwxr-xr-x
update-motd.d	[ DIR ]	drwxr-xr-x
valiases	[ DIR ]	drwxr-x--x
vdomainaliases	[ DIR ]	drwxr-x--x
vfilters	[ DIR ]	drwxr-x--x
vim	[ DIR ]	drwxr-xr-x
xdg	[ DIR ]	drwxr-xr-x
.pwd.lock	0 B	-rw-------
.whostmgrft	0 B	-rw-r--r--
adduser.conf	2.96 KB	-rw-r--r--
agent360.ini	809 B	-rw-r--r--
aliases	30 B	-rw-r--r--
antivirus.exim	10.38 KB	-rw-r--r--
at.deny	144 B	-rw-r-----
backupmxhosts	0 B	-rw-r-----
bash.bashrc	2.26 KB	-rw-r--r--
bash_completion	45 B	-rw-r--r--
bashrc	801 B	-rw-r--r--
bindresvport.blacklist	367 B	-rw-r--r--
blocked_incoming_email_countri...	0 B	-rw-r-----
blocked_incoming_email_country...	0 B	-rw-r-----
blocked_incoming_email_domains	0 B	-rw-r-----
ca-certificates.conf	7.99 KB	-rw-r--r--
ca-certificates.conf.dpkg-old	7.37 KB	-rw-r--r--
cpanel_exim_system_filter	11.86 KB	-rw-r--r--
cpanel_initial_install_ea4_pro...	1.81 KB	-rw-r--r--
cpanel_mail_netblocks	15 B	-rw-r-----
cpspamd.conf	0 B	-rw-r--r--
cpupdate.conf	86 B	-rw-r--r--
cron.deny	7 B	-rw-r--r--
crontab	1.11 KB	-rw-r--r--
dbowners	41 B	-rw-r-----
debconf.conf	2.9 KB	-rw-r--r--
debian_version	13 B	-rw-r--r--
deluser.conf	604 B	-rw-r--r--
demodomains	0 B	-rw-r-----
demouids	0 B	-rw-r-----
demousers	0 B	-rw-r-----
digestshadow	0 B	-rw-r-----
domain_remote_mx_ips.cdb	2.16 KB	-rw-r-----
domainips	15 B	-rw-r--r--
domainusers	37 B	-rw-r-----
e2scrub.conf	685 B	-rw-r--r--
email_send_limits	4.1 KB	-rw-r-----
environment	106 B	-rw-r--r--
ethertypes	1.77 KB	-rw-r--r--
exim.conf	85.76 KB	-rw-r--r--
exim.conf.dist	25.79 KB	-rw-r--r--
exim.conf.localopts	2.04 KB	-rw-r--r--
exim.conf.localopts.shadow	0 B	-rw-------
exim.conf.mailman2.dist	29.03 KB	-rw-r--r--
exim.conf.mailman2.exiscan.dis...	29.2 KB	-rw-r--r--
exim.crt	1.37 KB	-rw-rw----
exim.key	1.64 KB	-rw-rw----
exim.pl	231 B	-rw-r--r--
exim.pl.local	168.28 KB	-rw-r--r--
exim_suspended_list	715 B	-rw-r-----
exim_trusted_configs	24 B	-rw-r--r--
eximmailtrap	0 B	-rw-r--r--
eximrejects	163 B	-rw-r--r--
eximrejects.dpkg-dist	278 B	-rw-r--r--
fstab	696 B	-rw-r--r--
ftpd-ca.pem	0 B	-rw-rw----
ftpd-rsa-key.pem	1.64 KB	-rw-rw----
ftpd-rsa.pem	1.47 KB	-rw-rw----
ftpddisable	0 B	-rw-r--r--
fuse.conf	694 B	-rw-r--r--
gai.conf	2.52 KB	-rw-r--r--
greylist_common_mail_providers	0 B	-rw-r--r--
greylist_trusted_netblocks	0 B	-rw-r-----
group	1.35 KB	-rw-r--r--
group-	1.3 KB	-rw-r--r--
group.org	699 B	-rw-r--r--
gshadow	1.14 KB	-rw-------
gshadow-	1.11 KB	-rw-r-----
hdparm.conf	4.33 KB	-rw-r--r--
host.conf	92 B	-rw-r--r--
hostname	18 B	-rw-r--r--
hosts	356 B	-rw-r--r--
hosts.allow	1.1 KB	-rw-r--r--
hosts.deny	0 B	-rw-r--r--
idmapd.conf	171 B	-rw-r--r--
inputrc	1.71 KB	-rw-r--r--
ipaddrpool	0 B	-rw-r--r--
ips	46 B	-rw-r--r--
ips.dnsmaster	93 B	-rw-r--r--
ips.remotedns	44 B	-rw-r--r--
issue	26 B	-rw-r--r--
issue.net	19 B	-rw-r--r--
kernel-img.conf	145 B	-rw-r--r--
ld.so.cache	32.03 KB	-rw-r--r--
ld.so.conf	34 B	-rw-r--r--
legal	267 B	-rw-r--r--
libaudit.conf	191 B	-rw-r--r--
libuser.conf	2.33 KB	-rw-r--r--
localaliases	0 B	-rw-r--r--
localdomains	2.04 KB	-rw-r-----
localdomains.dpkg-dist	0 B	-rw-r-----
locale.alias	2.93 KB	-rw-r--r--
locale.gen	9.23 KB	-rw-r--r--
localtime	415 B	-rw-r--r--
lock_manager_local.ini	829 B	-rw-r--r--
login.defs	10.48 KB	-rw-r--r--
logrotate.conf	592 B	-rw-r--r--
lsb-release	104 B	-rw-r--r--
ltrace.conf	14.52 KB	-rw-r--r--
machine-id	33 B	-rw-r--r--
magic	111 B	-rw-r--r--
magic.mime	111 B	-rw-r--r--
mailbox_formats	51 B	-rw-r-----
mailcap	6.21 KB	-rw-r--r--
mailcap.order	449 B	-rw-r--r--
mailhelo	31 B	-rw-r-----
mailips	0 B	-rw-r-----
mailname	29 B	-rw-r--r--
manpath.config	5.09 KB	-rw-r--r--
manualmx	1 B	-rw-r-----
mecabrc	288 B	-rw-r--r--
mime.types	70.34 KB	-rw-r--r--
mke2fs.conf	744 B	-rw-r--r--
modules	195 B	-rw-r--r--
motd	302 B	-rw-r--r--
mtab	0 B	-r--r--r--
my.cnf	290 B	-rw-r--r--
named.conf	13.54 KB	-rw-r--r--
named.conf.cache	1.4 KB	-rw-------
named.conf.precpanelinstall	463 B	-rw-r--r--
named.conf.prerebuilddnsconfig	3.41 KB	-rw-r--r--
named.conf.rebuilddnsconfig	3.41 KB	-rw-r--r--
named.conf.zonedir.cache	57 B	-rw-------
nanorc	10.94 KB	-rw-r--r--
neighbor_netblocks	16 B	-rw-r-----
netconfig	767 B	-rw-r--r--
networks	91 B	-rw-r--r--
nfs.conf	1.12 KB	-rw-r--r--
nftables.conf	4.28 KB	-rw-------
nocgiusers	0 B	-rw-r-----
nscd.conf	2.81 KB	-rw-r--r--
nsswitch.conf	510 B	-rw-r--r--
os-release	386 B	-rw-r--r--
outgoing_mail_hold_users	0 B	-rw-r-----
outgoing_mail_suspended_users	0 B	-rw-r-----
pam.conf	552 B	-rw-r--r--
papersize	3 B	-rw-r--r--
passwd	3.29 KB	-rw-r--r--
passwd-	3.29 KB	-rw-r--r--
passwd.cache	19.02 KB	-rw-------
passwd.nouids.cache	10.07 KB	-rw-------
passwd.org	1.46 KB	-rw-r--r--
popularity-contest.conf	350 B	-rw-r--r--
profile	1.35 KB	-rw-r--r--
protocols	2.86 KB	-rw-r--r--
pure-ftpd.pem	3.11 KB	-rw-rw----
quotagrpadmins	220 B	-rw-r--r--
quotatab	526 B	-rw-r--r--
recent_authed_mail_ips	0 B	-rw-r--r--
recent_authed_mail_ips_users	0 B	-rw-r--r--
recent_recipient_mail_server_i...	144 B	-rw-r-----
relayhosts	0 B	-rw-r--r--
relayhostsusers	0 B	-rw-r--r--
remotedomains	0 B	-rw-r--r--
request-key.conf	1.84 KB	-rw-r--r--
resolv.conf	38 B	-rw-r--r--
rmt	58.57 KB	-rwxr-xr-x
rpc	887 B	-rw-r--r--
rsyslog.conf	1.35 KB	-rw-r--r--
secondarymx	0 B	-rw-r-----
senderverifybypasshosts	0 B	-rw-r-----
sensors3.conf	10.34 KB	-rw-r--r--
services	12.51 KB	-rw-r--r--
shadow	1.57 KB	-rw-------
shadow-	1.43 KB	-rw-r-----
shadow.nouids.cache	9.81 KB	-rw-------
shadow.org	892 B	-rw-r-----
shells	212 B	-rw-r--r--
skipsmtpcheckhosts	0 B	-rw-r-----
smartd.conf	6.88 KB	-rw-r--r--
spammeripblocks	0 B	-rw-r-----
spammers	0 B	-rw-r--r--
ssldomains	0 B	-rw-------
stats.conf	37 B	-rw-r--r--
subgid	0 B	-rw-r--r--
subuid	0 B	-rw-r--r--
sudo.conf	4.47 KB	-rw-r--r--
sudo_logsrvd.conf	9.17 KB	-rw-r--r--
sudoers	1.63 KB	-r--r-----
suphp.conf	4.34 KB	-rwxr-xr-x
suphp.conf.dpkg-dist	4.42 KB	-rwxr-xr-x
sysctl.conf	2.35 KB	-rw-r--r--
sysctl.conf.dpkg-dist	2.3 KB	-rw-r--r--
timezone	15 B	-rw-r--r--
trueuserdomains	37 B	-rw-r-----
trueuserowners	25 B	-rw-r--r--
trusted_mail_users	0 B	-rw-r-----
trustedmailhosts	0 B	-rw-r-----
ucf.conf	1.23 KB	-rw-r--r--
userbwlimits	52 B	-rw-r-----
userdatadomains	17.19 KB	-rw-r-----
userdatadomains.json	18.83 KB	-rw-r-----
userdomains	2.86 KB	-rw-r-----
userips	59 B	-rw-r-----
userplans	45 B	-rw-r-----
vtrgb	158 B	-rw-r--r--
warnquota.conf	314 B	-rw-r--r--
webspam	0 B	-rw-r--r--
wgetrc	4.83 KB	-rw-r--r--
wwwacct.conf	251 B	-rw-r--r--
wwwacct.conf.cache	304 B	-rw-r--r--
wwwacct.conf.shadow.cache	304 B	-rw-------
xattr.conf	681 B	-rw-r--r--
zsh_command_not_found	460 B	-rw-r--r--

Code Editor : nanorc

## Sample initialization file for GNU nano.
##
## For the options that take parameters, the default value is shown.
## Other options are unset by default.  To make sure that an option
## is disabled, you can use "unset <option>".
##
## Characters that are special in a shell should not be escaped here.
## Inside string parameters, quotes should not be escaped -- the last
## double quote on the line will be seen as the closing quote.

## Make 'nextword' (Ctrl+Right) and 'chopwordright' (Ctrl+Delete)
## stop at word ends instead of at beginnings.
# set afterends

## When soft line wrapping is enabled, make it wrap lines at blanks
## (tabs and spaces) instead of always at the edge of the screen.
# set atblanks

## Automatically indent a newly created line to the same number of
## tabs and/or spaces as the preceding line -- or as the next line
## if the preceding line is the beginning of a paragraph.
# set autoindent

## Back up files to the current filename plus a tilde.
# set backup

## The directory to put unique backup files in.
# set backupdir ""

## Use bold text instead of reverse video text.
# set boldtext

## Treat any line with leading whitespace as the beginning of a paragraph.
# set bookstyle

## The characters treated as closing brackets when justifying paragraphs.
## This may not include any blank characters.  Only closing punctuation,
## optionally followed by these closing brackets, can end sentences.
# set brackets ""')>]}"

## Automatically hard-wrap the current line when it becomes overlong.
# set breaklonglines

## Do case-sensitive searches by default.
# set casesensitive

## Constantly display the cursor position in the status bar or minibar.
# set constantshow

## Use cut-from-cursor-to-end-of-line by default.
# set cutfromcursor

## Do not use the line below the title bar, leaving it entirely blank.
# set emptyline

## Set the target width for automatic hard-wrapping and for justifying
## paragraphs.  If the specified value is 0 or less, the wrapping point
## will be the terminal's width minus this number.
# set fill -8

## Draw a vertical stripe at the given column, to help judge text width.
## (This option does not have a default value.)
# set guidestripe 75

## Remember the used search/replace strings for the next session.
set historylog

## Display a "scrollbar" on the righthand side of the edit window.
# set indicator

## Scroll the buffer contents per half-screen instead of per line.
# set jumpyscrolling

## Display line numbers to the left (and any anchors in the margin).
# set linenumbers

## Enable vim-style lock-files.  This is just to let a vim user know you
## are editing a file [s]he is trying to edit and vice versa.  There are
## no plans to implement vim-style undo state in these files.
set locking

## Fall back to slow libmagic to try and determine an applicable syntax.
# set magic

## The opening and closing brackets that are found by a matching-bracket
## search.  This may not contain blank characters.  The opening brackets
## must come before the closing ones, and they must be in the same order.
# set matchbrackets "(<[{)>]}"

## Suppress the title bar and show the filename plus a cursor-position
## percentage in the space of the status bar.
# set minibar

## Enable mouse support, if available for your system.  When enabled,
## mouse clicks can be used to place the cursor, set the mark (with a
## double click), and execute shortcuts.  The mouse will work in the
## X Window System, and on the console when gpm is running.
# set mouse

## Switch on multiple file buffers (inserting a file will put it into
## a separate buffer).
# set multibuffer

## Don't convert files from DOS/Mac format.
# set noconvert

## Don't display the helpful shortcut lists at the bottom of the screen.
# set nohelp

## Don't automatically add a newline when a file does not end with one.
# set nonewlines

## Set operating directory.  nano will not read or write files outside
## this directory and its subdirectories.  Also, the current directory
## is changed to here, so any files are inserted from this dir.  A blank
## string means the operating-directory feature is turned off.
# set operatingdir ""

## Remember the cursor position in each file for the next editing session.
# set positionlog

## Preserve the XON and XOFF keys (^Q and ^S).
# set preserve

## The characters treated as closing punctuation when justifying paragraphs.
## This may not contain blank characters.  Only these closing punctuations,
## optionally followed by closing brackets, can end sentences.
# set punct "!.?"

## Make status-bar messages disappear after 1 keystroke instead of after 20.
# set quickblank

## The regular expression that matches quoting characters in email
## or line-comment introducers in source code.  The default is:
# set quotestr "^([ 	]*([!#%:;>|}]|//))+"

## Try to work around a mismatching terminfo terminal description.
# set rawsequences

## Fix Backspace/Delete confusion problem.
# set rebinddelete

## Do regular-expression searches by default.
## Regular expressions are of the extended type (ERE).
# set regexp

## Save a changed buffer automatically on exit; don't prompt.
# set saveonexit
## (The old form of this option, 'set tempfile', is deprecated.)

## Put the cursor on the highlighted item in the file browser, and
## show the cursor in the help viewer; useful for people who use a
## braille display and people with poor vision.
# set showcursor

## Make the Home key smarter: when Home is pressed anywhere but at the
## very beginning of non-whitespace characters on a line, the cursor
## will jump to that beginning (either forwards or backwards).  If the
## cursor is already at that position, it will jump to the true start
## of the line (the left edge).
# set smarthome

## Spread overlong lines over multiple screen lines.
# set softwrap

## Use this spelling checker instead of the internal one.  This option
## does not have a default value.
# set speller "aspell -x -c"

## Use the end of the title bar for some state flags: I = auto-indenting,
## M = mark, L = hard-wrapping long lines, R = recording, S = soft-wrapping.
set stateflags

## Use this tab size instead of the default; it must be greater than 0.
# set tabsize 8

## Convert each typed tab to the fitting number of spaces.
# set tabstospaces

## Snip whitespace at the end of lines when justifying or hard-wrapping.
# set trimblanks

## Save files by default in Unix format (also when they were DOS or Mac).
# set unix

## The two single-column characters used to display the first characters
## of tabs and spaces.  187 in ISO 8859-1 (0000BB in Unicode) and 183 in
## ISO-8859-1 (0000B7 in Unicode) seem to be good values for these.
## The default when in a UTF-8 locale:
# set whitespace "»·"
## The default otherwise:
# set whitespace ">."

## Detect word boundaries differently by treating punctuation
## characters as parts of words.
# set wordbounds

## The characters (besides alphanumeric ones) that should be considered
## as parts of words.  This option does not have a default value.  When
## set, it overrides option 'set wordbounds'.
# set wordchars "<_>."

## Let an unmodified Backspace or Delete erase the marked region (instead
## of a single character, and without affecting the cutbuffer).
# set zap

## Hide the bars plus help lines and use the whole terminal as edit area.
# set zero

## Paint the interface elements of nano.  These are examples; there are
## no colors by default, except for errorcolor and spotlightcolor.
# set titlecolor bold,white,blue
# set promptcolor lightwhite,grey
# set statuscolor bold,white,green
# set errorcolor bold,white,red
# set spotlightcolor black,lightyellow
# set selectedcolor lightwhite,magenta
# set stripecolor ,yellow
# set scrollercolor cyan
# set numbercolor cyan
# set keycolor cyan
# set functioncolor green

## In root's .nanorc you might want to use:
# set titlecolor bold,white,magenta
# set promptcolor black,yellow
# set statuscolor bold,white,magenta
# set errorcolor bold,white,red
# set spotlightcolor black,orange
# set selectedcolor lightwhite,cyan
# set stripecolor ,yellow
# set scrollercolor magenta
# set numbercolor magenta
# set keycolor lightmagenta
# set functioncolor magenta

## === Syntax coloring ===
## For all details, see 'man nanorc', section SYNTAX HIGHLIGHTING.

## To include most of the existing syntax definitions, you can do:
include "/usr/share/nano/*.nanorc"

## Or you can select just the ones you need.  For example:
# include "/usr/share/nano/html.nanorc"
# include "/usr/share/nano/python.nanorc"
# include "/usr/share/nano/sh.nanorc"

## In /usr/share/nano/extra/ you can find some syntaxes that are
## specific for certain distros or for some less common languages.

## If <Tab> should always produce four spaces when editing a Python file,
## independent of the settings of 'tabsize' and 'tabstospaces':
# extendsyntax python tabgives "    "

## If <Tab> should always produce an actual TAB when editing a Makefile:
# extendsyntax makefile tabgives "	"

## === Key bindings ===
## For all details, see 'man nanorc', section REBINDING KEYS.

## If you want to suspend nano with one keystroke (instead of with ^T^Z):
# bind ^Z suspend main

## The <Ctrl+Delete> keystroke deletes the word to the right of the cursor.
## On some terminals the <Ctrl+Backspace> keystroke produces ^H, which is
## the ASCII character for backspace, so it is bound by default to the
## backspace function.  The <Backspace> key itself produces a different
## keycode, which is hard-bound to the backspace function.  So, if you
## normally use <Backspace> for backspacing and not ^H, you can make
## <Ctrl+Backspace> delete the word to the left of the cursor with:
# bind ^H chopwordleft main

## For a more mnemonic Comment keystroke (overriding Cut-from-cursor):
# bind M-K comment main

## If you want ^L to just refresh the screen and not center the cursor:
# bind ^L refresh main

## When you sometimes type M-J instead of M-K, or M-T instead of M-R:
# unbind M-J main
# unbind M-T main
## (Those functions are still accessible through ^T^J and ^T^V.)

## For quickly uppercasing or lowercasing the word under the cursor.
## (These effectively do a Ctrl+Right followed by a Shift+Ctrl+Left,
## and then pipe the selected text through a sed command.)
#bind Sh-M-U "^[Oc^[[1;6D^T|sed 's/.*/\U&/'^M" main
#bind Sh-M-L "^[Oc^[[1;6D^T|sed 's/.*/\L&/'^M" main

## If you would like nano to have keybindings that are more "usual",
## such as ^O for Open, ^F for Find, ^H for Help, and ^Q for Quit,
## then uncomment these:
#bind ^X cut main
#bind ^C copy main
#bind ^V paste all
#bind ^Q exit all
#bind ^S savefile main
#bind ^W writeout main
#bind ^O insert main
#set multibuffer
#bind ^H help all
#bind ^H exit help
#bind ^F whereis all
#bind ^G findnext all
#bind ^B wherewas all
#bind ^D findprevious all
#bind ^R replace main
#bind ^Z undo main
#bind ^Y redo main
#unbind ^K main
#unbind ^U all
#unbind ^N main
#unbind ^Y all
#unbind M-J main
#unbind M-T main
#bind ^A mark main
#bind ^P location main
#bind ^T gotoline main
#bind ^T gotodir browser
#bind ^T cutrestoffile execute
#bind ^L linter execute
#bind ^E execute main

${this.title}

Code Editor : nanorc