Gecko [ v99win.today ]

Name	Size	Permission
ACCOUNTING-CONTROL-MIB	30.35 KB	-rw-r--r--
ADSL-LINE-EXT-MIB	47.72 KB	-rw-r--r--
ADSL-LINE-MIB	166.62 KB	-rw-r--r--
ADSL-TC-MIB	3.84 KB	-rw-r--r--
ADSL2-LINE-MIB	200.61 KB	-rw-r--r--
ADSL2-LINE-TC-MIB	27.35 KB	-rw-r--r--
AGENTX-MIB	17.05 KB	-rw-r--r--
AGGREGATE-MIB	16.54 KB	-rw-r--r--
ALARM-MIB	37.6 KB	-rw-r--r--
APM-MIB	84.17 KB	-rw-r--r--
APPC-MIB	195.03 KB	-rw-r--r--
APPLETALK-MIB	100.12 KB	-rw-r--r--
APPLICATION-MIB	117.42 KB	-rw-r--r--
APPN-DLUR-MIB	23.12 KB	-rw-r--r--
APPN-MIB	195.24 KB	-rw-r--r--
APPN-TRAP-MIB	20.11 KB	-rw-r--r--
APS-MIB	55.35 KB	-rw-r--r--
ARC-MIB	13.7 KB	-rw-r--r--
ATM-ACCOUNTING-INFORMATION-MIB	14.81 KB	-rw-r--r--
ATM-MIB	102.19 KB	-rw-r--r--
ATM-TC-MIB	26.64 KB	-rw-r--r--
ATM2-MIB	116.33 KB	-rw-r--r--
BGP4-MIB	42.98 KB	-rw-r--r--
BRIDGE-MIB	49.75 KB	-rw-r--r--
CAPWAP-BASE-MIB	91.79 KB	-rw-r--r--
CAPWAP-DOT11-MIB	13.01 KB	-rw-r--r--
CHARACTER-MIB	20.43 KB	-rw-r--r--
CIRCUIT-IF-MIB	12.94 KB	-rw-r--r--
CLNS-MIB	36.38 KB	-rw-r--r--
COPS-CLIENT-MIB	31.14 KB	-rw-r--r--
DECNET-PHIV-MIB	92.47 KB	-rw-r--r--
DIAL-CONTROL-MIB	46.44 KB	-rw-r--r--
DIFFSERV-CONFIG-MIB	8.31 KB	-rw-r--r--
DIFFSERV-DSCP-TC	1.82 KB	-rw-r--r--
DIFFSERV-MIB	124.31 KB	-rw-r--r--
DIRECTORY-SERVER-MIB	22.95 KB	-rw-r--r--
DISMAN-EVENT-MIB	66.51 KB	-rw-r--r--
DISMAN-EXPRESSION-MIB	41.67 KB	-rw-r--r--
DISMAN-NSLOOKUP-MIB	18.09 KB	-rw-r--r--
DISMAN-PING-MIB	55.97 KB	-rw-r--r--
DISMAN-SCHEDULE-MIB	24.04 KB	-rw-r--r--
DISMAN-SCRIPT-MIB	62.8 KB	-rw-r--r--
DISMAN-TRACEROUTE-MIB	67.89 KB	-rw-r--r--
DLSW-MIB	127.12 KB	-rw-r--r--
DNS-RESOLVER-MIB	38.41 KB	-rw-r--r--
DNS-SERVER-MIB	36.64 KB	-rw-r--r--
DOCS-BPI-MIB	56.38 KB	-rw-r--r--
DOCS-CABLE-DEVICE-MIB	117.58 KB	-rw-r--r--
DOCS-IETF-BPI2-MIB	132.01 KB	-rw-r--r--
DOCS-IETF-CABLE-DEVICE-NOTIFIC...	54.1 KB	-rw-r--r--
DOCS-IETF-QOS-MIB	126.68 KB	-rw-r--r--
DOCS-IETF-SUBMGT-MIB	23.7 KB	-rw-r--r--
DOCS-IF-MIB	203.82 KB	-rw-r--r--
DOT12-IF-MIB	31.22 KB	-rw-r--r--
DOT12-RPTR-MIB	81.58 KB	-rw-r--r--
DOT3-EPON-MIB	111.11 KB	-rw-r--r--
DOT3-OAM-MIB	83.71 KB	-rw-r--r--
DPI20-MIB	1.64 KB	-rw-r--r--
DS0-MIB	9.46 KB	-rw-r--r--
DS0BUNDLE-MIB	9.76 KB	-rw-r--r--
DS1-MIB	100.28 KB	-rw-r--r--
DS3-MIB	60.71 KB	-rw-r--r--
DSA-MIB	21.76 KB	-rw-r--r--
DSMON-MIB	170.47 KB	-rw-r--r--
DVB-RCS-MIB	113 KB	-rw-r--r--
EBN-MIB	25.64 KB	-rw-r--r--
EFM-CU-MIB	110.62 KB	-rw-r--r--
ENTITY-MIB	57.75 KB	-rw-r--r--
ENTITY-SENSOR-MIB	15.77 KB	-rw-r--r--
ENTITY-STATE-MIB	11.96 KB	-rw-r--r--
ENTITY-STATE-TC-MIB	6.16 KB	-rw-r--r--
ETHER-CHIPSET-MIB	20.81 KB	-rw-r--r--
EtherLike-MIB	82.51 KB	-rw-r--r--
FC-MGMT-MIB	73.44 KB	-rw-r--r--
FCIP-MGMT-MIB	33.72 KB	-rw-r--r--
FDDI-SMT73-MIB	66.51 KB	-rw-r--r--
FIBRE-CHANNEL-FE-MIB	57.73 KB	-rw-r--r--
FLOW-METER-MIB	64.47 KB	-rw-r--r--
FORCES-MIB	15.15 KB	-rw-r--r--
FR-ATM-PVC-SERVICE-IWF-MIB	46.14 KB	-rw-r--r--
FR-MFR-MIB	29.39 KB	-rw-r--r--
FRAME-RELAY-DTE-MIB	32.19 KB	-rw-r--r--
FRNETSERV-MIB	103.54 KB	-rw-r--r--
FRSLD-MIB	64.49 KB	-rw-r--r--
Finisher-MIB	32.3 KB	-rw-r--r--
GMPLS-LABEL-STD-MIB	24.33 KB	-rw-r--r--
GMPLS-LSR-STD-MIB	16.81 KB	-rw-r--r--
GMPLS-TC-STD-MIB	4.78 KB	-rw-r--r--
GMPLS-TE-STD-MIB	60.63 KB	-rw-r--r--
GSMP-MIB	59.5 KB	-rw-r--r--
HC-ALARM-MIB	27.48 KB	-rw-r--r--
HC-PerfHist-TC-MIB	9.47 KB	-rw-r--r--
HC-RMON-MIB	115.65 KB	-rw-r--r--
HCNUM-TC	4.55 KB	-rw-r--r--
HDSL2-SHDSL-LINE-MIB	83.45 KB	-rw-r--r--
HOST-RESOURCES-MIB	51.31 KB	-rw-r--r--
HOST-RESOURCES-TYPES	10.33 KB	-rw-r--r--
HPR-IP-MIB	17.73 KB	-rw-r--r--
HPR-MIB	46.17 KB	-rw-r--r--
IBM-6611-APPN-MIB	170.32 KB	-rw-r--r--
IF-CAP-STACK-MIB	9.87 KB	-rw-r--r--
IF-INVERTED-STACK-MIB	4.95 KB	-rw-r--r--
IF-MIB	70.01 KB	-rw-r--r--
IFCP-MGMT-MIB	37.28 KB	-rw-r--r--
IGMP-STD-MIB	16.93 KB	-rw-r--r--
INET-ADDRESS-MIB	16.39 KB	-rw-r--r--
INTEGRATED-SERVICES-GUARANTEED...	8.47 KB	-rw-r--r--
INTEGRATED-SERVICES-MIB	26.01 KB	-rw-r--r--
INTERFACETOPN-MIB	38.88 KB	-rw-r--r--
IP-FORWARD-MIB	45.2 KB	-rw-r--r--
IP-MIB	181.32 KB	-rw-r--r--
IPATM-IPMC-MIB	98.81 KB	-rw-r--r--
IPFIX-MIB	63.97 KB	-rw-r--r--
IPMCAST-MIB	91.55 KB	-rw-r--r--
IPMROUTE-STD-MIB	30.43 KB	-rw-r--r--
IPOA-MIB	53.72 KB	-rw-r--r--
IPS-AUTH-MIB	39.87 KB	-rw-r--r--
IPSEC-SPD-MIB	92.3 KB	-rw-r--r--
IPV6-FLOW-LABEL-MIB	1.98 KB	-rw-r--r--
IPV6-ICMP-MIB	15.56 KB	-rw-r--r--
IPV6-MIB	47.56 KB	-rw-r--r--
IPV6-MLD-MIB	13.32 KB	-rw-r--r--
IPV6-TC	2.31 KB	-rw-r--r--
IPV6-TCP-MIB	7.09 KB	-rw-r--r--
IPV6-UDP-MIB	4.3 KB	-rw-r--r--
ISCSI-MIB	104.9 KB	-rw-r--r--
ISDN-MIB	44.63 KB	-rw-r--r--
ISIS-MIB	142.12 KB	-rw-r--r--
ISNS-MIB	121.17 KB	-rw-r--r--
ITU-ALARM-MIB	16.05 KB	-rw-r--r--
ITU-ALARM-TC-MIB	2.77 KB	-rw-r--r--
Job-Monitoring-MIB	68.37 KB	-rw-r--r--
L2TP-MIB	93.79 KB	-rw-r--r--
LANGTAG-TC-MIB	2.29 KB	-rw-r--r--
LMP-MIB	107.44 KB	-rw-r--r--
MALLOC-MIB	46.56 KB	-rw-r--r--
MAU-MIB	68.86 KB	-rw-r--r--
MGMD-STD-MIB	54.68 KB	-rw-r--r--
MIDCOM-MIB	85.49 KB	-rw-r--r--
MIOX25-MIB	26.03 KB	-rw-r--r--
MIP-MIB	73.7 KB	-rw-r--r--
MOBILEIPV6-MIB	156.71 KB	-rw-r--r--
MPLS-FTN-STD-MIB	34.83 KB	-rw-r--r--
MPLS-L3VPN-STD-MIB	58.11 KB	-rw-r--r--
MPLS-LC-ATM-STD-MIB	10.71 KB	-rw-r--r--
MPLS-LC-FR-STD-MIB	8.25 KB	-rw-r--r--
MPLS-LDP-ATM-STD-MIB	25.16 KB	-rw-r--r--
MPLS-LDP-FRAME-RELAY-STD-MIB	21.61 KB	-rw-r--r--
MPLS-LDP-GENERIC-STD-MIB	10.31 KB	-rw-r--r--
MPLS-LDP-STD-MIB	79.63 KB	-rw-r--r--
MPLS-LSR-STD-MIB	75.04 KB	-rw-r--r--
MPLS-TC-STD-MIB	23.95 KB	-rw-r--r--
MPLS-TE-STD-MIB	84.69 KB	-rw-r--r--
MSDP-MIB	40.16 KB	-rw-r--r--
MTA-MIB	41.38 KB	-rw-r--r--
Modem-MIB	43.91 KB	-rw-r--r--
NAT-MIB	85.1 KB	-rw-r--r--
NEMO-MIB	59.84 KB	-rw-r--r--
NETWORK-SERVICES-MIB	20.51 KB	-rw-r--r--
NHRP-MIB	89.06 KB	-rw-r--r--
NOTIFICATION-LOG-MIB	24.12 KB	-rw-r--r--
OPT-IF-MIB	211.51 KB	-rw-r--r--
OSPF-MIB	138.03 KB	-rw-r--r--
OSPF-TRAP-MIB	20.5 KB	-rw-r--r--
OSPFV3-MIB	141.13 KB	-rw-r--r--
P-BRIDGE-MIB	38.89 KB	-rw-r--r--
PARALLEL-MIB	7.5 KB	-rw-r--r--
PIM-BSR-MIB	24.14 KB	-rw-r--r--
PIM-MIB	28.7 KB	-rw-r--r--
PIM-STD-MIB	128.58 KB	-rw-r--r--
PINT-MIB	17.7 KB	-rw-r--r--
PKTC-IETF-EVENT-MIB	43.07 KB	-rw-r--r--
PKTC-IETF-MTA-MIB	86.42 KB	-rw-r--r--
PKTC-IETF-SIG-MIB	114.23 KB	-rw-r--r--
POLICY-BASED-MANAGEMENT-MIB	82.27 KB	-rw-r--r--
POWER-ETHERNET-MIB	21.13 KB	-rw-r--r--
PPP-BRIDGE-NCP-MIB	14.57 KB	-rw-r--r--
PPP-IP-NCP-MIB	6.42 KB	-rw-r--r--
PPP-LCP-MIB	26.13 KB	-rw-r--r--
PPP-SEC-MIB	10.37 KB	-rw-r--r--
PTOPO-MIB	29.73 KB	-rw-r--r--
PW-ATM-MIB	41.87 KB	-rw-r--r--
PW-ENET-STD-MIB	17.15 KB	-rw-r--r--
PW-MPLS-STD-MIB	31.33 KB	-rw-r--r--
PW-STD-MIB	83.26 KB	-rw-r--r--
PW-TC-STD-MIB	10.4 KB	-rw-r--r--
PW-TDM-MIB	45.33 KB	-rw-r--r--
PerfHist-TC-MIB	6.47 KB	-rw-r--r--
Printer-MIB	164.3 KB	-rw-r--r--
Q-BRIDGE-MIB	82.04 KB	-rw-r--r--
RADIUS-ACC-CLIENT-MIB	23.69 KB	-rw-r--r--
RADIUS-ACC-SERVER-MIB	26.23 KB	-rw-r--r--
RADIUS-AUTH-CLIENT-MIB	26.29 KB	-rw-r--r--
RADIUS-AUTH-SERVER-MIB	28.38 KB	-rw-r--r--
RADIUS-DYNAUTH-CLIENT-MIB	31.78 KB	-rw-r--r--
RADIUS-DYNAUTH-SERVER-MIB	28.56 KB	-rw-r--r--
RAQMON-MIB	51.95 KB	-rw-r--r--
RAQMON-RDS-MIB	23.8 KB	-rw-r--r--
RDBMS-MIB	53.96 KB	-rw-r--r--
RFC1155-SMI	3 KB	-rw-r--r--
RFC1213-MIB	77.8 KB	-rw-r--r--
RFC1381-MIB	33.21 KB	-rw-r--r--
RFC1382-MIB	89.06 KB	-rw-r--r--
RFC1414-MIB	3.92 KB	-rw-r--r--
RIPv2-MIB	16.33 KB	-rw-r--r--
RMON-MIB	144.36 KB	-rw-r--r--
RMON2-MIB	218.29 KB	-rw-r--r--
ROHC-MIB	38.88 KB	-rw-r--r--
ROHC-RTP-MIB	22.02 KB	-rw-r--r--
ROHC-UNCOMPRESSED-MIB	5.77 KB	-rw-r--r--
RS-232-MIB	23.42 KB	-rw-r--r--
RSERPOOL-MIB	47.09 KB	-rw-r--r--
RSTP-MIB	10.5 KB	-rw-r--r--
RSVP-MIB	92.11 KB	-rw-r--r--
RTP-MIB	35.38 KB	-rw-r--r--
SCSI-MIB	94.54 KB	-rw-r--r--
SCTP-MIB	44.26 KB	-rw-r--r--
SFLOW-MIB	13.91 KB	-rw-r--r--
SIP-COMMON-MIB	68.82 KB	-rw-r--r--
SIP-MIB	34.24 KB	-rw-r--r--
SIP-SERVER-MIB	29.58 KB	-rw-r--r--
SIP-TC-MIB	6.77 KB	-rw-r--r--
SIP-UA-MIB	6.24 KB	-rw-r--r--
SLAPM-MIB	108.33 KB	-rw-r--r--
SMON-MIB	42.86 KB	-rw-r--r--
SMUX-MIB	4.54 KB	-rw-r--r--
SNA-NAU-MIB	102.87 KB	-rw-r--r--
SNA-SDLC-MIB	119.03 KB	-rw-r--r--
SNMP-COMMUNITY-MIB	18.27 KB	-rw-r--r--
SNMP-FRAMEWORK-MIB	21.82 KB	-rw-r--r--
SNMP-IEEE802-TM-MIB	1.33 KB	-rw-r--r--
SNMP-MPD-MIB	5.37 KB	-rw-r--r--
SNMP-NOTIFICATION-MIB	19.54 KB	-rw-r--r--
SNMP-PROXY-MIB	8.89 KB	-rw-r--r--
SNMP-REPEATER-MIB	119.78 KB	-rw-r--r--
SNMP-SSH-TM-MIB	12.41 KB	-rw-r--r--
SNMP-TARGET-MIB	22.24 KB	-rw-r--r--
SNMP-TSM-MIB	8.7 KB	-rw-r--r--
SNMP-USER-BASED-SM-MIB	38.28 KB	-rw-r--r--
SNMP-USM-AES-MIB	2.15 KB	-rw-r--r--
SNMP-USM-DH-OBJECTS-MIB	20.61 KB	-rw-r--r--
SNMP-VIEW-BASED-ACM-MIB	33.36 KB	-rw-r--r--
SNMPv2-CONF	8.07 KB	-rw-r--r--
SNMPv2-M2M-MIB	30.74 KB	-rw-r--r--
SNMPv2-MIB	28.62 KB	-rw-r--r--
SNMPv2-PARTY-MIB	55.41 KB	-rw-r--r--
SNMPv2-PDU	3.8 KB	-rw-r--r--
SNMPv2-SMI	8.71 KB	-rw-r--r--
SNMPv2-TC	37.14 KB	-rw-r--r--
SNMPv2-TM	5.64 KB	-rw-r--r--
SNMPv2-USEC-MIB	7.71 KB	-rw-r--r--
SONET-MIB	73.25 KB	-rw-r--r--
SOURCE-ROUTING-MIB	14.33 KB	-rw-r--r--
SSPM-MIB	33.55 KB	-rw-r--r--
SYSAPPL-MIB	63.04 KB	-rw-r--r--
SYSLOG-MSG-MIB	20 KB	-rw-r--r--
SYSLOG-TC-MIB	8.76 KB	-rw-r--r--
T11-FC-FABRIC-ADDR-MGR-MIB	45.8 KB	-rw-r--r--
T11-FC-FABRIC-CONFIG-SERVER-MI...	62.35 KB	-rw-r--r--
T11-FC-FABRIC-LOCK-MIB	20.58 KB	-rw-r--r--
T11-FC-FSPF-MIB	39.92 KB	-rw-r--r--
T11-FC-NAME-SERVER-MIB	41.21 KB	-rw-r--r--
T11-FC-ROUTE-MIB	15.88 KB	-rw-r--r--
T11-FC-RSCN-MIB	27.18 KB	-rw-r--r--
T11-FC-SP-AUTHENTICATION-MIB	34.25 KB	-rw-r--r--
T11-FC-SP-POLICY-MIB	168.51 KB	-rw-r--r--
T11-FC-SP-SA-MIB	92.09 KB	-rw-r--r--
T11-FC-SP-TC-MIB	24.49 KB	-rw-r--r--
T11-FC-SP-ZONING-MIB	19.7 KB	-rw-r--r--
T11-FC-VIRTUAL-FABRIC-MIB	17.15 KB	-rw-r--r--
T11-FC-ZONE-SERVER-MIB	96.12 KB	-rw-r--r--
T11-TC-MIB	2.48 KB	-rw-r--r--
TCP-ESTATS-MIB	102.74 KB	-rw-r--r--
TCP-MIB	27.89 KB	-rw-r--r--
TCPIPX-MIB	10.68 KB	-rw-r--r--
TE-LINK-STD-MIB	59.35 KB	-rw-r--r--
TE-MIB	58.7 KB	-rw-r--r--
TIME-AGGREGATE-MIB	12.93 KB	-rw-r--r--
TN3270E-MIB	69.47 KB	-rw-r--r--
TN3270E-RT-MIB	31.66 KB	-rw-r--r--
TOKEN-RING-RMON-MIB	77.31 KB	-rw-r--r--
TOKENRING-MIB	27.34 KB	-rw-r--r--
TOKENRING-STATION-SR-MIB	5.49 KB	-rw-r--r--
TPM-MIB	71.86 KB	-rw-r--r--
TRANSPORT-ADDRESS-MIB	16.03 KB	-rw-r--r--
TRIP-MIB	69.94 KB	-rw-r--r--
TRIP-TC-MIB	4 KB	-rw-r--r--
TUNNEL-MIB	27.17 KB	-rw-r--r--
UDP-MIB	20.39 KB	-rw-r--r--
UDPLITE-MIB	20.49 KB	-rw-r--r--
UPS-MIB	63.42 KB	-rw-r--r--
URI-TC-MIB	5.75 KB	-rw-r--r--
VDSL-LINE-EXT-MCM-MIB	24.2 KB	-rw-r--r--
VDSL-LINE-EXT-SCM-MIB	14.54 KB	-rw-r--r--
VDSL-LINE-MIB	96.62 KB	-rw-r--r--
VDSL2-LINE-MIB	271.27 KB	-rw-r--r--
VDSL2-LINE-TC-MIB	54.81 KB	-rw-r--r--
VPN-TC-STD-MIB	2.31 KB	-rw-r--r--
VRRP-MIB	26.06 KB	-rw-r--r--
WWW-MIB	40.75 KB	-rw-r--r--

Code Editor : ADSL2-LINE-TC-MIB

ADSL2-LINE-TC-MIB DEFINITIONS ::= BEGIN

IMPORTS
   MODULE-IDENTITY,
   transmission
      FROM SNMPv2-SMI

TEXTUAL-CONVENTION
      FROM SNMPv2-TC;

adsl2TCMIB MODULE-IDENTITY
   LAST-UPDATED "200610040000Z" -- October 4th, 2006
   ORGANIZATION "ADSLMIB Working Group"
   CONTACT-INFO "WG-email:  adslmib@ietf.org
   Info:      https://www1.ietf.org/mailman/listinfo/adslmib

Chair:     Mike Sneed
                        Sand Channel Systems
             Postal:    P.O. Box 37324
                        Raleigh NC 27627-732
             Email:     sneedmike@hotmail.com
             Phone:     +1 206 600 7022

Co-Chair & Co-editor:
                        Menachem Dodge
                        ECI Telecom Ltd.
             Postal:    30 Hasivim St.
                        Petach Tikva 49517,
                        Israel.
             Email:     mbdodge@ieee.org
             Phone:     +972 3 926 8421

Co-editor: Moti Morgenstern
                        ECI Telecom Ltd.
             Postal:    30 Hasivim St.
                        Petach Tikva 49517,
                        Israel.
             Email:     moti.morgenstern@ecitele.com
             Phone:     +972 3 926 6258

Co-editor: Scott Baillie
                        NEC Australia
             Postal:    649-655 Springvale Road,
                        Mulgrave, Victoria 3170,
                        Australia.
             Email:     scott.baillie@nec.com.au
             Phone:     +61 3 9264 3986

Co-editor: Umberto Bonollo
                        NEC Australia
             Postal:    649-655 Springvale Road,
                        Mulgrave, Victoria 3170,
                        Australia.
             Email:     umberto.bonollo@nec.com.au
             Phone:     +61 3 9264 3385
            "
   DESCRIPTION
        "This MIB Module provides Textual Conventions to be
         used by the ADSL2-LINE-MIB module for the purpose of
         managing ADSL, ADSL2, and ADSL2+ lines.

Copyright (C) The Internet Society (2006).  This version of
        this MIB module is part of RFC 4706: see the RFC itself for
        full legal notices."

REVISION "200610040000Z" -- October 4th, 2006
   DESCRIPTION "Initial version, published as RFC 4706."
      ::= { transmission 238 2 } -- adsl2MIB 2

------------------------------------------------
--          Textual Conventions               --
------------------------------------------------

Adsl2Unit ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
      "Identifies a transceiver as being either an ATU-C or
       an ATU-R.  An ADSL line consists of two transceivers, an ATU-C
       and an ATU-R.  Attributes with this syntax reference the two
       sides of a line.  Specified as an INTEGER, the two values

are:

atuc(1)  -- Central office ADSL terminal unit (ATU-C).
        atur(2)  -- Remote ADSL terminal unit (ATU-R)."
   SYNTAX      INTEGER {
                  atuc(1),
                  atur(2)
               }

Adsl2Direction ::= TEXTUAL-CONVENTION
     STATUS current
     DESCRIPTION
        "Identifies the direction of a band as being
         either upstream or downstream.  Specified as an INTEGER,
         the two values are:
          upstream(1), and
          downstream(2)."
     SYNTAX INTEGER {
       upstream(1),
       downstream(2)
    }

Adsl2TransmissionModeType ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
      "A set of ADSL2 line transmission modes, with one bit
       per mode.  The notes (F) and (L) denote Full-Rate
       and Lite/splitterless, respectively:
          Bit 00 : Regional Std. (ANSI T1.413) (F)
          Bit 01 : Regional Std. (ETSI DTS/TM06006) (F)
          Bit 02 : G.992.1 POTS non-overlapped (F)
          Bit 03 : G.992.1 POTS overlapped (F)
          Bit 04 : G.992.1 ISDN non-overlapped (F)
          Bit 05 : G.992.1 ISDN overlapped (F)
          Bit 06 : G.992.1 TCM-ISDN non-overlapped (F)
          Bit 07 : G.992.1 TCM-ISDN overlapped (F)
          Bit 08 : G.992.2 POTS non-overlapped (L)
          Bit 09 : G.992.2 POTS overlapped (L)
          Bit 10 : G.992.2 with TCM-ISDN non-overlapped (L)
          Bit 11 : G.992.2 with TCM-ISDN overlapped (L)
          Bit 12 : G.992.1 TCM-ISDN symmetric (F) -- not in G.997.1
          Bit 13-17: Reserved
          Bit 18 : G.992.3 POTS non-overlapped (F)
          Bit 19 : G.992.3 POTS overlapped (F)
          Bit 20 : G.992.3 ISDN non-overlapped (F)
          Bit 21 : G.992.3 ISDN overlapped (F)

Bit 22-23: Reserved
          Bit 24 : G.992.4 POTS non-overlapped (L)
          Bit 25 : G.992.4 POTS overlapped (L)
          Bit 26-27: Reserved
          Bit 28 : G.992.3 Annex I All-Digital non-overlapped (F)
          Bit 29 : G.992.3 Annex I All-Digital overlapped (F)
          Bit 30 : G.992.3 Annex J All-Digital non-overlapped (F)
          Bit 31 : G.992.3 Annex J All-Digital overlapped (F)
          Bit 32 : G.992.4 Annex I All-Digital non-overlapped (L)
          Bit 33 : G.992.4 Annex I All-Digital overlapped (L)
          Bit 34 : G.992.3 Annex L POTS non-overlapped, mode 1,
                                   wide U/S (F)
          Bit 35 : G.992.3 Annex L POTS non-overlapped, mode 2,
                                   narrow U/S(F)
          Bit 36 : G.992.3 Annex L POTS overlapped, mode 3,
                                   wide U/S (F)
          Bit 37 : G.992.3 Annex L POTS overlapped, mode 4,
                                   narrow U/S (F)
          Bit 38 : G.992.3 Annex M POTS non-overlapped (F)
          Bit 39 : G.992.3 Annex M POTS overlapped (F)
          Bit 40 : G.992.5 POTS non-overlapped (F)
          Bit 41 : G.992.5 POTS overlapped (F)
          Bit 42 : G.992.5 ISDN non-overlapped (F)
          Bit 43 : G.992.5 ISDN overlapped (F)
          Bit 44-45: Reserved
          Bit 46 : G.992.5 Annex I All-Digital non-overlapped (F)
          Bit 47 : G.992.5 Annex I All-Digital overlapped (F)
          Bit 48 : G.992.5 Annex J All-Digital non-overlapped (F)
          Bit 49 : G.992.5 Annex J All-Digital overlapped (F)
          Bit 50 : G.992.5 Annex M POTS non-overlapped (F)
          Bit 51 : G.992.5 Annex M POTS overlapped (F)
          Bit 52-55: Reserved"
   SYNTAX      BITS {
                  ansit1413(0),
                  etsi(1),
                  g9921PotsNonOverlapped(2),
                  g9921PotsOverlapped(3),
                  g9921IsdnNonOverlapped(4),
                  g9921isdnOverlapped(5),
                  g9921tcmIsdnNonOverlapped(6),
                  g9921tcmIsdnOverlapped(7),
                  g9922potsNonOverlapped(8),
                  g9922potsOverlapped(9),
                  g9922tcmIsdnNonOverlapped(10),
                  g9922tcmIsdnOverlapped(11),
                  g9921tcmIsdnSymmetric(12),
                  reserved1(13),
                  reserved2(14),
                  reserved3(15),
                  reserved4(16),
                  reserved5(17),
                  g9923PotsNonOverlapped(18),
                  g9923PotsOverlapped(19),
                  g9923IsdnNonOverlapped(20),
                  g9923isdnOverlapped(21),
                  reserved6(22),
                  reserved7(23),
                  g9924potsNonOverlapped(24),
                  g9924potsOverlapped(25),
                  reserved8(26),
                  reserved9(27),
                  g9923AnnexIAllDigNonOverlapped(28),
                  g9923AnnexIAllDigOverlapped(29),
                  g9923AnnexJAllDigNonOverlapped(30),
                  g9923AnnexJAllDigOverlapped(31),
                  g9924AnnexIAllDigNonOverlapped(32),
                  g9924AnnexIAllDigOverlapped(33),
                  g9923AnnexLMode1NonOverlapped(34),
                  g9923AnnexLMode2NonOverlapped(35),
                  g9923AnnexLMode3Overlapped(36),
                  g9923AnnexLMode4Overlapped(37),
                  g9923AnnexMPotsNonOverlapped(38),
                  g9923AnnexMPotsOverlapped(39),
                  g9925PotsNonOverlapped(40),
                  g9925PotsOverlapped(41),
                  g9925IsdnNonOverlapped(42),
                  g9925isdnOverlapped(43),
                  reserved10(44),
                  reserved11(45),
                  g9925AnnexIAllDigNonOverlapped(46),
                  g9925AnnexIAllDigOverlapped(47),
                  g9925AnnexJAllDigNonOverlapped(48),
                  g9925AnnexJAllDigOverlapped(49),
                  g9925AnnexMPotsNonOverlapped(50),
                  g9925AnnexMPotsOverlapped(51),
                  reserved12(52),
                  reserved13(53),
                  reserved14(54),
                  reserved15(55)
               }

Adsl2RaMode ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
      "Specifies the rate adaptation behavior for the line.
       The three possible behaviors are:

manual(1)    - No Rate-Adaptation.  The initialization
                       process attempts to synchronize to a
                       specified rate.
        raInit(2)    - Rate-Adaptation during initialization process
                       only, which attempts to synchronize to a rate
                       between minimum and maximum specified values.
        dynamicRa(3) - Dynamic Rate-Adaptation during initialization
                       process as well as during SHOWTIME."
   SYNTAX      INTEGER {
                  manual(1),
                  raInit(2),
                  dynamicRa(3)
               }

Adsl2InitResult ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
      "Specifies the result of a full initialization attempt; the
       six possible result values are:
        noFail(0)            - Successful initialization.
        configError(1)       - Configuration failure.
        configNotFeasible(2) - Configuration details not supported.
        commFail(3)          - Communication failure.
        noPeerAtu(4)         - Peer ATU not detected.
        otherCause(5)        - Other initialization failure reason.

The values used are as defined in ITU-T G.997.1,
       paragraph 7.5.1.3"
   SYNTAX      INTEGER {
                  noFail(0),
                  configError(1),
                  configNotFeasible(2),
                  commFail(3),
                  noPeerAtu(4),
                  otherCause(5)
               }

Adsl2OperationModes ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
      "The ADSL2 management model specified includes an ADSL Mode
       attribute that identifies an instance of ADSL Mode-Specific
       PSD Configuration object in the ADSL Line Profile.  The
       following classes of ADSL operating mode are defined.
       The notes (F) and (L) denote Full-Rate and Lite/splitterless
       respectively:

+-------+--------------------------------------------------+
       | Value |         ADSL operation mode description          |
       +-------+--------------------------------------------------+

1   - The default/generic PSD configuration.  Default
                 configuration will be used when no other matching
                 mode-specific configuration can be found.
           2   - ADSL family.  The attributes included in the Mode-
                 Specific PSD Configuration are irrelevant for
                 ITU-T G.992.1 and G.992.2 ADSL modes.  Hence, it
                 is possible to map those modes to this generic
                 class.
          3-7  - Unused. Reserved for future ITU-T specification.
           8   - G.992.3 POTS non-overlapped (F)
           9   - G.992.3 POTS overlapped (F)
          10   - G.992.3 ISDN non-overlapped (F)
          11   - G.992.3 ISDN overlapped (F)
        12-13  - Unused. Reserved for future ITU-T specification.
          14   - G.992.4 POTS non-overlapped (L)
          15   - G.992.4 POTS overlapped (L)
        16-17  - Unused. Reserved for future ITU-T specification.
          18   - G.992.3 Annex I All-Digital non-overlapped (F)
          19   - G.992.3 Annex I All-Digital overlapped (F)
          20   - G.992.3 Annex J All-Digital non-overlapped (F)
          21   - G.992.3 Annex J All-Digital overlapped (F)
          22   - G.992.4 Annex I All-Digital non-overlapped (L)
          23   - G.992.4 Annex I All-Digital overlapped (L)
          24   - G.992.3 Annex L POTS non-overlapped, mode 1,
                 wide U/S (F)
          25   - G.992.3 Annex L POTS non-overlapped, mode 2,
                 narrow U/S(F)
          26   - G.992.3 Annex L POTS overlapped, mode 3,
                 wide U/S (F)
          27   - G.992.3 Annex L POTS overlapped, mode 4,
                 narrow U/S (F)
          28   - G.992.3 Annex M POTS non-overlapped (F)
          29   - G.992.3 Annex M POTS overlapped (F)
          30   - G.992.5 POTS non-overlapped (F)
          31   - G.992.5 POTS overlapped (F)
          32   - G.992.5 ISDN non-overlapped (F)
          33   - G.992.5 ISDN overlapped (F)
        34-35  - Unused. Reserved for future ITU-T specification.
          36   - G.992.5 Annex I All-Digital non-overlapped (F)
          37   - G.992.5 Annex I All-Digital overlapped (F)
          38   - G.992.5 Annex J All-Digital non-overlapped (F)
          39   - G.992.5 Annex J All-Digital overlapped (F)
          40   - G.992.5 Annex M POTS non-overlapped (F)
          41   - G.992.5 Annex M POTS overlapped (F)
      "
   SYNTAX      INTEGER {
                  defMode (1),
                  adsl(2),
                  g9923PotsNonOverlapped(8),
                  g9923PotsOverlapped(9),
                  g9923IsdnNonOverlapped(10),
                  g9923isdnOverlapped(11),
                  g9924potsNonOverlapped(14),
                  g9924potsOverlapped(15),
                  g9923AnnexIAllDigNonOverlapped(18),
                  g9923AnnexIAllDigOverlapped(19),
                  g9923AnnexJAllDigNonOverlapped(20),
                  g9923AnnexJAllDigOverlapped(21),
                  g9924AnnexIAllDigNonOverlapped(22),
                  g9924AnnexIAllDigOverlapped(23),
                  g9923AnnexLMode1NonOverlapped(24),
                  g9923AnnexLMode2NonOverlapped(25),
                  g9923AnnexLMode3Overlapped(26),
                  g9923AnnexLMode4Overlapped(27),
                  g9923AnnexMPotsNonOverlapped(28),
                  g9923AnnexMPotsOverlapped(29),
                  g9925PotsNonOverlapped(30),
                  g9925PotsOverlapped(31),
                  g9925IsdnNonOverlapped(32),
                  g9925isdnOverlapped(33),
                  g9925AnnexIAllDigNonOverlapped(36),
                  g9925AnnexIAllDigOverlapped(37),
                  g9925AnnexJAllDigNonOverlapped(38),
                  g9925AnnexJAllDigOverlapped(39),
                  g9925AnnexMPotsNonOverlapped(40),
                  g9925AnnexMPotsOverlapped(41)
               }

Adsl2PowerMngState ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
      "Attributes with this syntax uniquely identify each power
       management state defined for the ADSL/ADSL2 or ADSL2+ link.
       The possible values are:
         l0(1) - L0 - Full power management state.
         l1(2) - L1 - Low power management state (for G.992.2).
         l2(3) - L2 - Low power management state (for G.992.3,
                      G.992.4, and G.992.5).
         l3(4) - L3 - Idle power management state."
   SYNTAX      INTEGER {

l0(1),
                  l1(2),
                  l2(3),
                  l3(4)
               }

Adsl2ConfPmsForce ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
      "Attributes with this syntax are configuration parameters
       that reference the desired power management state for the
       ADSL/ADSL2 or ADSL2+ link:
         l3toL0(0)          - Perform a transition from L3 to L0
                              (Full power management state).
         l0toL2(2)          - Perform a transition from L0 to L2
                              (Low power management state).
         l0orL2toL3(3)      - Perform a transition into L3 (Idle
                              power management state).

The values used are as defined in ITU-T G.997.1,
       paragraph 7.3.1.1.3"
   SYNTAX      INTEGER {
                  l3toL0(0),
                  l0toL2(2),
                  l0orL2toL3(3)
               }

Adsl2LConfProfPmMode ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
      "Attributes with this syntax are configuration parameters
       that reference the power modes/states into which the ATU-C or
       ATU-R may autonomously transit.

It is a BITS structure that allows control of the following
       transit options:
        allowTransitionsToIdle(0)     - XTU may autonomously transit
                                        to idle (L3) state.
        allowTransitionsToLowPower(1) - XTU may autonomously transit
                                        to low-power (L2) state."
   SYNTAX BITS {
       allowTransitionsToIdle(0),
       allowTransitionsToLowPower(1)
     }

Adsl2LineLdsf ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
      "Attributes with this syntax are configuration parameters
       that control the Loop Diagnostic mode for the ADSL/ADSL2 or
       ADSL2+ link.  The possible values are:
         inhibit(0)  - Inhibit Loop Diagnostic mode.
         force(1)    - Force/Initiate Loop Diagnostic mode.

The values used are as defined in ITU-T G.997.1,
       paragraph 7.3.1.1.8"
   SYNTAX INTEGER {
       inhibit(0),
       force(1)
     }

Adsl2LdsfResult ::= TEXTUAL-CONVENTION
     STATUS current
     DESCRIPTION
        "Possible failure reasons associated with performing
         a Dual Ended Loop Test (DELT) on a DSL line.
         Possible values are:
          none(1)         - The default value in case LDSF was never
                            requested for the associated line.
          success(2)      - The recent command completed
                            successfully.
          inProgress(3)   - The Loop Diagnostics process is in
                            progress.
          unsupported(4)  - The NE or the line card doesn't support
                            LDSF.
          cannotRun(5)    - The NE cannot initiate the command, due
                            to a nonspecific reason.
          aborted(6)      - The Loop Diagnostics process aborted.
          failed(7)       - The Loop Diagnostics process failed.
          illegalMode(8)  - The NE cannot initiate the command, due
                            to the specific mode of the relevant
                            line.
          adminUp(9)      - The NE cannot initiate the command, as
                            the relevant line is administratively
                            'Up'.
          tableFull(10)   - The NE cannot initiate the command, due
                            to reaching the maximum number of rows
                            in the results table.
          noResources(11) - The NE cannot initiate the command, due
                            to lack of internal memory resources."
     SYNTAX INTEGER {
          none(1),
          success(2),
          inProgress(3),
          unsupported(4),
          cannotRun(5),
          aborted(6),
          failed(7),
          illegalMode(8),
          adminUp(9),
          tableFull(10),
          noResources(11)
     }

Adsl2SymbolProtection ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
      "Attributes with this syntax are configuration parameters
       that reference the minimum-length impulse noise protection
       (INP) in terms of number of symbols.  The possible values are:
       noProtection (i.e., INP not required), halfSymbol (i.e., INP
       length is 1/2 symbol), and 1-16 symbols in steps of 1 symbol."
   SYNTAX      INTEGER {
               noProtection(1),
               halfSymbol(2),
               singleSymbol(3),
               twoSymbols(4),
               threeSymbols(5),
               fourSymbols(6),
               fiveSymbols(7),
               sixSymbols(8),
               sevenSymbols(9),
               eightSymbols(10),
               nineSymbols(11),
               tenSymbols(12),
               elevenSymbols(13),
               twelveSymbols(14),
               thirteeSymbols(15),
               fourteenSymbols(16),
               fifteenSymbols(17),
               sixteenSymbols(18)
             }
Adsl2MaxBer ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
      "Attributes with this syntax are configuration parameters
       that reference the maximum Bit Error Rate (BER).
       The possible values are:

eminus3(1)   - Maximum BER=E^-3

eminus5(2)   - Maximum BER=E^-5
         eminus7(3)   - Maximum BER=E^-7"
   SYNTAX      INTEGER {
                  eminus3(1),
                  eminus5(2),
                  eminus7(3)
               }

Adsl2ScMaskDs ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
      "Each one of the 512 bits in this OCTET
       STRING array represents the corresponding bin
       in the downstream direction.  A value of one
       indicates that the bin is not in use."
   SYNTAX      OCTET STRING (SIZE(0..64))

Adsl2ScMaskUs ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
      "Each one of the 64 bits in this OCTET
      STRING array represents the corresponding bin
      in the upstream direction.  A value of one
      indicates that the bin is not in use."
   SYNTAX      OCTET STRING (SIZE(0..8))

Adsl2RfiDs ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
      "Each one of the 512 bits in this OCTET
      STRING array represents the corresponding bin
      in the downstream direction.  A value of one
      indicates that the bin is part of a notch
      filter."
   SYNTAX      OCTET STRING (SIZE(0..64))

Adsl2PsdMaskDs ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
      "This is a structure that represents up to
      32 PSD Mask breakpoints.
      Each breakpoint occupies 3 octets: The first
      two octets hold the index of the sub-carrier
      associated with the breakpoint.  The third octet
      holds the PSD reduction at the breakpoint from 0
      (0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of
      0.5 dBm/Hz."
   SYNTAX      OCTET STRING (SIZE(0..96))

Adsl2PsdMaskUs ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
      "This is a structure that represents up to
      4 PSD Mask breakpoints.
      Each breakpoint occupies 3 octets: The first
      two octets hold the index of the sub-carrier
      associated with the breakpoint.  The third octet
      holds the PSD reduction at the breakpoint from 0
      (0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of
      0.5 dBm/Hz."
   SYNTAX      OCTET STRING (SIZE(0..12))

Adsl2Tssi ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
      "This is a structure that represents up to
      32 transmit spectrum shaping (TSSi) breakpoints.
      Each breakpoint occupies 3 octets: The first
      two octets hold the index of the sub-carrier
      associated with the breakpoint.  The third octet
      holds the shaping parameter at the breakpoint.  It
      is a value from 0 to 127 (units of -0.5 dB).  The
      special value 127 indicates that the sub-carrier
      is not transmitted."
   SYNTAX      OCTET STRING (SIZE(0..96))

Adsl2LastTransmittedState ::= TEXTUAL-CONVENTION
     STATUS current
     DESCRIPTION
        "This parameter represents the last successfully
         transmitted initialization state in the last full
         initialization performed on the line.  States are
         per the specific xDSL technology and are numbered
         from 0 (if G.994.1 is used) or 1 (if G.994.1 is
         not used) up to Showtime."
     SYNTAX      INTEGER {
       atucG9941(0),
       atucQuiet1(1),
       atucComb1(2),
       atucQuiet2(3),
       atucComb2(4),
       atucIcomb1(5),
       atucLineprob(6),
       atucQuiet3(7),
       atucComb3(8),
       atucIComb2(9),
       atucMsgfmt(10),
       atucMsgpcb(11),
       atucQuiet4(12),
       atucReverb1(13),
       atucTref1(14),
       atucReverb2(15),
       atucEct(16),
       atucReverb3(17),
       atucTref2(18),
       atucReverb4(19),
       atucSegue1(20),
       atucMsg1(21),
       atucReverb5(22),
       atucSegue2(23),
       atucMedley(24),
       atucExchmarker(25),
       atucMsg2(26),
       atucReverb6(27),
       atucSegue3(28),
       atucParams(29),
       atucReverb7(30),
       atucSegue4(31),
       atucShowtime(32),
       --
       aturG9941(100),
       aturQuiet1(101),
       aturComb1(102),
       aturQuiet2(103),
       aturComb2(104),
       aturIcomb1(105),
       aturLineprob(106),
       aturQuiet3(107),
       aturComb3(108),
       aturIcomb2(109),
       aturMsgfmt(110),
       aturMsgpcb(111),
       aturReverb1(112),
       aturQuiet4(113),
       aturReverb2(114),
       aturQuiet5(115),
       aturReverb3(116),
       aturEct(117),
       aturReverb4(118),
       aturSegue1(119),
       aturReverb5(120),
       aturSegue2(121),
       aturMsg1(122),
       aturMedley(123),
       aturExchmarker(124),
       aturMsg2(125),
       aturReverb6(126),
       aturSegue3(127),
       aturParams(128),
       aturReverb7(129),
       aturSegue4(130),
       aturShowtime(131)
     }

Adsl2LineStatus ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
      "Attributes with this syntax are status parameters
       that reflect the failure status for a given endpoint of
       ADSL/ADSL2 or ADSL2+ link.

This BITS structure can report the following failures:

noDefect(0)       - This bit position positively reports
                            that no defect or failure exists.
        lossOfFrame(1)    - Loss of frame synchronization.
        lossOfSignal(2)   - Loss of signal.
        lossOfPower(3)    - Loss of power.  Usually this failure may
                            be reported for ATU-Rs only.
        initFailure(4)    - Recent initialization process failed.
                            Never active on ATU-R."
   SYNTAX BITS {
       noDefect(0),
       lossOfFrame(1),
       lossOfSignal(2),
       lossOfPower(3),
       initFailure(4)
     }

Adsl2ChAtmStatus ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
     "Attributes with this syntax are status parameters that
      reflect the failure status for Transmission Convergence (TC)
      layer of a given ATM interface (data path over an ADSL/ADSL2
      or ADSL2+ link).

This BITS structure can report the following failures:
       noDefect(0)              - This bit position positively
                                  reports that no defect or failure
                                  exists.
       noCellDelineation(1)     - The link was successfully

initialized, but cell delineation
                                  was never acquired on the
                                  associated ATM data path.
       lossOfCellDelineation(2) - Loss of cell delineation on the
                                  associated ATM data path."
   SYNTAX BITS {
       noDefect(0),
       noCellDelineation(1),
       lossOfCellDelineation(2)
     }

Adsl2ChPtmStatus ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
     "Attributes with this syntax are status parameters that
      reflect the failure status for a given PTM interface (packet
      data path over an ADSL/ADSL2 or ADSL2+ link).

This BITS structure can report the following failures:
          noDefect(0)     - This bit position positively
                            reports that no defect or failure exists.
          outOfSync(1)    - Out of synchronization."
      SYNTAX BITS {
          noDefect(0),
          outOfSync(1)
     }

END

${this.title}

Code Editor : ADSL2-LINE-TC-MIB